Pelco WS5000 User Manual download pdf (Page 2)

2 C1628M-F (10/07)

About This Guide

Thank you for purchasing Pelco’s Endura

workstation with WS5000 advanced system software. This guide provides basic instructions on how to

connect your Endura workstation, start the WS5000 advanced system software, monitor live video, and work with recorded video.

For detailed instructions on installing, programming, and using your Endura workstation, refer to the installation and operation manuals included

with your unit.

Connecting the Equipment

Refer to Figure 1 as you make the front and back panel connections required to operate this unit:

1. Connect video output (DVI). To connect a VGA monitor to this output, use a DVI-to-VGA adapter plug supplied with the Endura workstation.

2. Connect audio input and output.

3. Connect Cat5e or better network cable to the 1 gigabit RJ-45 network port and to the Endura network.

4. Connect keyboard and mouse to USB ports (front or back panel).

5. Connect power cable to the power connector and a power source.

6. Turn on power.

7. Check indicators.

Figure 1. Connecting the Endura Workstation

CPU ACTIVITY

POWER INDICATOR

03267-39-0020

PRODUCT SERIAL STICKERNUMBER

DVD/CD

DRIVE

NETWORK

ACTIVITY

NETWORK STATUS

UNIT STATUS

POWER BUTTON

CONFIGURATION/

RESET BUTTON

USB 2.0 PORT

AUDIO OUT

POWER CONNECTOR

NETWORK

CONNECTOR (RJ-45)

USB 2.0 PORTS

MICROPHONE IN

DIGITAL VIDEO (DVI)

CONNECTORS

AUDIO IN

1 2 3 4 5 6 7 8

No comments

Pelco WS5000 User Manual Page 2