Pelco DVR DX4500 User Manual download pdf (Page 8)

8 C2676M (9/07)

Installing a Hard Disk Drive

1. Properly shut down the DX4500/DX4600 Series DVR. Refer to the installation manual or operation/

programming manual supplied with the unit.

2. Unplug the power cord from the wall socket.

Figure 3. Removing Power Cord from Wall

3. Remove the power cord from the back of the unit.

Figure 4. Removing Power Cord from Back of Unit

4. Disconnect any cables or connections that may restrict access or interfere with the removal of the

unit.

NOTE: The security surveillance service provided by the DX4500/DX4600 is interrupted when the unit is

taken offline.

5. (If applicable) Unscrew the fasteners that are securing the unit in the rack and carefully lift it out of

the rack.

WARNING: It is critical that the unit be unplugged for your safety. You must remove the power

cord because current continues to flow through the DX4500/DX4600 even when the unit is without

power. First, unplug the power cord from the wall socket, then unplug it from the rear of the DVR.

WARNING: The chassis assembly includes parts with sharp edges. To avoid injury, use caution

when working in and around the chassis and components.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Pelco DVR DX4500 User Manual Page 8