Pelco DX4000 User Manual download pdf (Page 42)

42 C2602M-C (3/07)

Figure 49. Alarm Recording Setup Menu

3. For any camera that is set up with an alarm, select the Record field and turn on recording.

4. Select a start and stop time if you want to limit the recording to less than the full day.

5. Move to the pre-alarm duration field and select the number of seconds before an alarm that the DX4000 should start recording. Including pre-

alarm activity in the recorded video ensures that you will capture all relevant activity surrounding an alarm. Choose between 1 and 5 seconds.

6. Move to the post-alarm duration field and select the number of seconds after an alarm that the DX4000 should continue recording.

Including post-alarm activity in the recorded video ensures that you will capture all relevant activity surrounding an alarm. You can record

for a maximum of three minutes.

7. Press the Return button twice to display the main menu. A message appears stating that the settings are being saved. The settings take

effect immediately.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 77 78

No comments

Pelco DX4000 User Manual Page 42