Pelco EH4010 User Manual download pdf (Page 1)

C413M-E (7/99)

EH4007/EH4010/EH4014/EH4018

Camera Enclosure

300 W. Pontiac Way,

Clovis, CA 93612-5699

USA

In North America & Canada:

Tel (800) 289-9100

FAX (800) 289-9150

DataFAX (800) 289-9108

International Customers:

Tel (1-559) 292-1981

FAX (1-559) 348-1120

DataFAX (1-559) 292-0435

Pelco Online

http://www.pelco.com

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1. Installation and servicing should only be done by qualified service personnel and conform

to all local codes.

2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclosure,

it is designed for indoor use only and it must not be installed where exposed to rain and

moisture.

3. Only use replacement parts recommended by Pelco.

4. The installation method and materials should be capable to supporting four times the

weight of the enclosure, pan/tilt, camera and lens combination.

The product and/or manual may bear the following marks:

Please thoroughly familiarize yourself with the information in this manual prior to installation and

operation.

This symbol indicates that dangerous voltage

constituting a risk of electric shock is present

within this unit.

This symbol indicates that there are impor-

tant operating and maintenance instructions

in the literature accompanying this unit.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

DESCRIPTION

The EH4007, EH4010, EH4014, and EH4018 are low-cost camera enclosures designed for use

with solid-state CCD-type cameras in indoor environments. These enclosures are easy to install

and service. The removable rear cap provides easy access to the slide-out camera sled on which

the camera is mounted and has adjustable glands that make installing the power and video cables

easy. The removable front cap lets you manually adjust the lens without removing the camera.

The EH4007 is primarily designed for vertical-format CCD-type cameras and includes a ceiling-

mount bracket. The EH4010 is designed for 1/2-inch format cameras and can be used in fixed-

mount applications or mounted to a light-duty pan/tilt. The EH4014 and EH4018 are designed for

2/3-inch format cameras with fixed focal length or motorized lenses.

Models

EH4007 7-inch camera enclosure

EH4010 10-inch camera enclosure

EH4014 14-inch camera enclosure

EH4018 18-inch camera enclosure

INSTALLATION

The following parts are supplied:

EH4007

1 7-inch camera enclosure

To attach camera to sled:

1 3/8-inch Phillips screw

EH4010/EH4014/EH4018

1 Camera enclosure

1 Parts bag

2 Glands

To attach camera to sled:

1 3/8-inch Phillips screw

To mount enclosure:

2 1/2-inch hex screws

2 Flat washers

2 Split lock washers

LISTED

1 2 3 4

Summary of Contents

Page 1 - Camera Enclosure

C413M-E (7/99)EH4007/EH4010/EH4014/EH4018Camera Enclosure300 W. Pontiac Way,Clovis, CA 93612-5699USAIn North America & Canada:Tel (800) 289-9100FA

Page 2 - EH4007 Installation

EH4007 Installation1. Remove the two Phillips screws from the rear cap and remove the rear cap from the enclosure.2. Loosen the hex screw securing the

Page 3 - Service Manual

Wire GaugeMaximum distance from transformer to loadTable B. 24 VAC Wiring DistancesThe following are the recommended maximum distances for 24 VAC app

Page 4 - SPECIFICATIONS

Comments to this Manuals

No comments

Pelco EH4010 User Manual Page 1

Browse online or download User Manual for Holders Pelco EH4010. Pelco EH4010 User's Manual

Summary of Contents

Comments to this Manuals

Pelco EH4010 User Manual Page 1

Browse online or download User Manual for Holders Pelco EH4010. Pelco EH4010 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Holders Pelco EH4010