Pelco IS150 User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
22 C3427M-C (10/07)
SW1-8: Day/Night Operation (DW models only)
NOTE: On CW models, SW1-8 is unused and does not affect camera operation.
DW model cameras regularly check the brightness level of the field of view to determine when to switch
between day (color) and night (black-white) operation. Use SW1-8 to set the general light levels at which
the camera will automatically switch.
Set to ON (dark) to use standard thresholds to switch between color and black-white operation. This is the
default.
Set to OFF (dusk) to use higher light thresholds to switch between color and black-white operation.
Actual brightness threshold levels are affected by camera angle, amount of zoom, field of view, lens, and
type of lighting. The switching process lasts from seven to 10 seconds.
NOTE: If the camera switches between day/night mode at least three consecutive times within a short
time period, the camera will remain in the last mode for 10 minutes. To override this 10 minute pause,
cycle the power or expose the camera to an extreme light level change (for example, from very dim light to
very bright light).
Figure 12 and Table B show how the camera switches between color and black-white operation for each
setting.
Figure 12. DW Models Threshold Switching Levels
NOTE: These switching thresholds are approximate and were measured using a 3.0 mm to 9.5 mm lens at
F1.0. Use the thresholds in Table B as a guide when installing the unit.
Table B. DW Models Switching Thresholds
Dark (ON) Dusk (OFF)
Color to B-W 1.0 lux 4.0 lux
B-W to Color 3.0 lux 7.0 lux
B-W
MODE
COLOR
MODE
FALLING LIGHT LEVEL
RISING LIGHT LEVEL
B-W
MODE
COLOR
MODE
DUSK
4.0 lux
7.0 lux
B-W
MODE
COLOR
MODE
FALLING LIGHT LEVEL
RISING LIGHT LEVEL
B-W
MODE
COLOR
MODE
DARK
1.0 lux
3.0 lux
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Comments to this Manuals

No comments