Pelco C1302M-F User Manual download pdf (Page 14)

14 C1302M-F (11/08)

3. Slide the camera module into the enclosure. Refer to Figure 6 to position the camera module properly in the enclosure. Carefully mate the

camera’s power connector to the mating connector located inside the enclosure.

Models with a wiper: The tab located inside the enclosure must be pointing down before installing the camera module (refer to Figure 6).

To position the tab, place the wiper located at the front of the enclosure in the center of the viewing window (refer to Figure 7).

Figure 6. Install Camera Module

Figure 7. Center Wiper

WARNING: Do not force the camera module into the enclosure.

CENTER

NOTCHES

TAB

CAMERA

MODULE

CAMERA

ENCLOSURE

CENTER WIPER

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

No comments

Pelco C1302M-F User Manual Page 14