Pelco CC3600 User Manual download pdf (Page 12)

[ 12 ] Pelco Manual C1981M-C (8/02)

SWITCH SETTINGS

Figure 7. Switch Settings

01236

BLACK REPRESENTS

SWITCH POSITION

AUTO

6300

3200

4200

NORMAL (0.45)

LINEAR (1.0)

AGC ON

AGC OFF

AI LENS

DD LENS

INTERNAL

Color Balance - Switch Settings 9 and 10

Pelco’s CC3500 and CC3600 cameras have four color balance settings.

Auto (Default setting) - Automatically corrects the color balance of

the picture.

6300°K - May improve the color balance in areas where 6300°K

lighting is the main source.

3200°K - May improve the color balance in some indoor lighting

conditions.

4200°K - May improve some indoor fluorescent lighted scenes.

Gamma - Switch Setting 8

Set the Gamma level to one of the following:

Normal (Default setting) - Increases visibility in dark areas of the

picture.

Linear - Linear response increases (overall) contrast.

AGC (Automatic Gain Control) - Switch Setting 7

Automatically adjusts the image to compensate for changes in light levels

when using fixed or manual iris lenses. Following are the AGC switch

settings:

ON (Default setting) - Enables the AGC mode.

OFF - Disables the AGC mode.

Lens Mode Selector (AI/DD Switch) - Switch Setting 6

The AI/DD switch setting is determined by the type of lens used:

AI - Auto iris lens

DD - Direct drive lens

SYNC (Synchronization) - Switch Setting 5

Locks the frame rate to the power supply frequency. Eliminates vertical roll

caused by multiple cameras connected to the same switching device. Each

camera output is synchronized to the frequency of the power supply. Set the

camera synchronization mode to one of the following:

Line Lock (LL) - Line-locks frame rate of cameras.

Internal - Disables line lock.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Pelco CC3600 User Manual Page 12

Comments to this Manuals

Related products and manuals for Security cameras Pelco CC3600