Pelco pelco CCC5100H User Manual

QUICK START GUIDE C2910M-B-QS (2/06) CCC5100H Series Camera

10 C2910M-B-QS (2/06) 4. Select the user-definable profile to use during power-up:a. Select DEFAULT and press the center button.b. Press the top or bot

C2910M-B-QS (2/06) 11 DC-DRIVE AUTO IRIS LENS SETUP Before using a DC-drive auto iris lens, you must adjust the DC offset setting.Use the following s

12 C2910M-B-QS (2/06) 9. Hold the auto iris lens so you can watch the iris (refer to Figure 3). Then increase the DC OFFSET setting slowly until the

C2910M-B-QS (2/06) 13 LENS FOCUS Focus the camera lens.1. Auto iris only: Cover the auto iris lens with a suitable neutral density (ND) filter to ope

14 C2910M-B-QS (2/06) 6. Fixed focal length lens only: a. Set the lens focal length to far ( ∞ ).b. Adjust the back focus. Move the back focus locki

C2910M-B-QS (2/06) 15Revision HistoryManual No. Date CommentsC2910M-QS 9/04 Original version.C2910M-A-QS 4/05 Updated for RGB filters, new firmware.C29

Worldwide Headquarters3500 Pelco WayClovis, California 93612 USAUSA & CanadaTel: 800/289-9100Fax: 800/289-9150InternationalTel: 1-559/292-1981Fax:

2 C2910M-B-QS (2/06) This quick start guide describes how to install and configure the CCC5100H Series camera in most applications. It contains a repr

C2910M-B-QS (2/06) 3 HARDWARE Refer to Figure 1 as you install the CCC5100H Series camera. Figure 1. CCC5100H ConnectorsVIDEOCONNECTORSERVICECONNEC

4 C2910M-B-QS (2/06) LENS The CCC5100H Series camera supports both manual and DC-drive auto iris lenses, either fixed focal length or varifocal. The c

C2910M-B-QS (2/06) 5 CONNECTIONS The CCC5100H Series camera offers standard power and coax video connectors. To use the RJ45-10 multifunction connect

6 C2910M-B-QS (2/06) SETUP MENUS Use the setup menus to customize the camera settings. Refer to the setup menus as shown on this and the opposite pag

C2910M-B-QS (2/06) 7 WHITE BALANCEMODE ATW NORMAL<ATW NORMAL/DESAT><MANUAL RED/BLUE><MANUAL COLOR TEMP>BACKEXITATW NORMAL/DESATL

8 C2910M-B-QS (2/06) ACCESSING THE SETUP MENUS Use the top, center, and bottom buttons on the rear panel to access and navigate the setup menus. Tabl

C2910M-B-QS (2/06) 9 CAMERA PROFILE Select a basic camera profile and then customize it. After you save your custom camera settings into a user-defina