Pelco PMCL532A User Manual download pdf (Page 18)

18 C2937M-D (1/09)

Maintenance

If the quality of the picture is poor and cannot be improved by making adjustments on the front control panel, inspect all system connections and

cable runs.

CLEANING

• Gently wipe your screen with a clean camel hair brush or a soft, clean, lint-free cloth.

• Gently apply pressure to the screen surface to clean the display.

• Do not spray any liquid directly on the screen or the LCD monitor casing.

• Chemical cleaners can damage the screen or the LCD monitor casing.

Troubleshooting

Intermittent Loss of Video in PIP/PBP and Main Video

Possible cause: In PAL, when using PIP or PBP, cycling through cameras (with one or more cameras out of operation) causes the monitor to

auto adjust and locate the signal.

Remedy: Check your input devices. If there is a problem with a camera from another input device such as no power signal or bad video, then

correct or disconnect the camera or device.

WARNING: To reduce the risk of electrical shock, do not remove the cover or back of the monitor. No user-serviceable parts are inside.

Refer servicing to qualified personnel, or contact Pelco Customer Serviceat 1-800-289-9100 (USA and Canada) or +1-559-292-1981

(International) for assistance. Refer to Product Warranty and Return Information located on the inside back cover of this document.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Pelco PMCL532A User Manual Page 18