Pelco LWM41 User Manual Page 1

Receiver for LWM41Legacy® Series MountC553M-C (3/03)®INSTALLATION/OPERATIONLRD41A11 Series

10 C553M-C (3/03)SPECIFICATIONSELECTRICALInput Voltage:LRD41A11-1Input Voltage: 120 VACP/T Voltage: 120 VACCamera Voltage: 24 VAC or 120 VAC (selectab

C553M-C (3/03) 11WARRANTY AND RETURN INFORMATIONWARRANTYPelco will repair or replace, without charge, any merchandise proved defective in material orw

World Headquarters3500 Pelco WayClovis, California 93612 USAUSA & CanadaTel: 800/289-9100Fax: 800/289-9150InternationalTel: 1-559/292-1981Fax: 1-5

2 C553M-C (3/03)CONTENTSSection PageIMPORTANT SAFEGUARDS AND WARNINGS ...

C553M-C (3/03) 3DESCRIPTIONThe LRD41A11 Series Legacy® system fixed speed receiver is designed for use with Pelco’s LWM41 wall mount. Standardfeatures

4 C553M-C (3/03)INSTALLATIONCABLE AND WIRING PREPARATION METHODSThere are four methods of installing the LWM41 wall mount. Cables can be fed directly

C553M-C (3/03) 5BOTTOM ENTRY WITH CONDUIT1. Install LWM41 wall mount (refer to the installation instructions supplied with the mount).2. Remove the bo

6 C553M-C (3/03)Figure 2. Installing Switch Bracket, Steps A and B0128101282Figure 3. Installing Switch Bracket, Steps C and D

C553M-C (3/03) 7INSTALLING THE LRD41A11 SERIES RECEIVERNOTE: The LRD41A1 Series receiver accommodates an additional electrical (coax) connection to t

8 C553M-C (3/03)CHANGING CAMERA VOLTAGESet the camera voltage jumpers for the voltage that the camera will use. Refer to Figure 6 for the locations an

C553M-C (3/03) 9OPERATIONCONTROL WITHOUT VIDEOWith this feature, the receiver can detect Coaxitron® commands from the controller when no video signal