Pelco LWM41 User Manual download pdf (Page 8)

8 C553M-C (3/03)

CHANGING CAMERA VOLTAGE

Set the camera voltage jumpers for the voltage that the camera will use. Refer to Figure 6 for the locations and settings for the

jumpers.

WARNING: CAMERA DAMAGE POSSIBLE. You will damage your camera if you connect it to the wrong connector on an

EH4700L or EH5700L Series enclosure. If your camera will use the same power as the enclosure, plug the camera into the

CAM1 socket on the circuit board inside the enclosure. If your camera will use 24 VAC and the enclosure will use either 120

VAC or 230 VAC, plug the camera into the CAM2 socket only.

If your camera will use 24 VAC, do NOT plug the camera into the CAM1 socket or you will damage your camera. CAM1 has

either 120 VAC or 230 VAC on it.

BE CAREFUL – REMEMBER – CAM1 IS ENCLOSURE POWER. NEVER PLUG YOUR CAMERA INTO CAM1 IF THE

CAMERA’S VOLTAGE IS DIFFERENT FROM THE ENCLOSURE’S VOLTAGE.

Camera Voltage Settings

24 VAC Camera

Voltage for

LRD41A11-1, -2, -3

120 V

24 V

AC-LOW

COM

AC-HI

PT-LOW

PT-HI

CAM-LOW

CAM-HI

120 V

24 V

AC-LOW

COM

AC-HI

PT-LOW

PT-HI

CAM-LOW

CAM-HI

120 VAC Camera

Voltage for

LRD41A11-1

and

230 VAC Camera

Voltage for

LRD41A11-3

120 V

AC-LOW

COM

AC-HI

PT-LOW

PT-HI

CAM-LOW

CAM-HI

Jumper/Strap Location on PC Board

Potentiometer Adjustment For Lens Voltage

NOTE: Camera Strapping

wires are blue.

24 V

Increase

Decrease

R65

01278

Figure 6. Camera Voltage Settings

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Pelco LWM41 User Manual Page 8

Comments to this Manuals

Related products and manuals for Camera accessories Pelco LWM41