Pelco DX4600 User Manual download pdf (Page 11)

C2673M-D (8/10) 11

Front Panel

The DX4500/DX4600 front panel allows you to operate the DVR without having to use the remote control or mouse (refer to Figure 2).

Figure 2. Front Panel

Access Door: Provides access to the power switch and optical CD/DVD drive.

Channel and Camera Control Buttons:

• Button [1]: Only selects camera 1.

• Buttons [2–8], Eight-Channel Unit or [2–16], Sixteen-Channel Unit: Selects the respective camera and its alternate

function. (Press the Shift button to access the alternate function).

[2] OSD: Toggles on and off the display of the toolbar.

[3] COPY: Copies recorded video data to the target media.

[4] MARK: Sets the beginning point from which to search recorded data.

[5] FOCUS-: Decreases camera focus.

[6] FOCUS+: Increases camera focus.

[7] IRIS-: Close camera iris.

[8] IRIS+: Opens camera iris.

[9] ALM OFF: Turns off active alarm state.

[10] INFO: Toggles on and off the display of system information.

[11] LOG: Toggles on and off the display of the log list.

[12] AUX: Sends an auxiliary command.

[13] SET: Starts the PTZ programming mode.

[14] CLR: Clears a programmed event.

[15] PATTERN: Assigns the recorded PTZ actions to the user-specified pattern number.

[16] PRESET: Assigns the position of the selected camera to a user-specified preset number.

Remote Sensor: Communicates between the DVR and remote control.

System Status Indicators:

• NET: Is lit when the network is connected.

• BACKUP: Is lit when the backup process is active.

• HDD: Blinks when the hard drive is accessed.

• ALARM: Is lit when the alarm out is in progress.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

No comments

Pelco DX4600 User Manual Page 11