Pelco DX7100 User Manual download pdf (Page 6)

6 C641M (11/03)

BACK PANEL LAYOUT

Figure 2. Back Panel Layout (DX7116 Model Shown)

1 Camera Inputs – 8 or 16 BNC camera inputs, depending on model

2 Alarm Inputs – 8 normally closed dry contact inputs

3 Analog Monitor Output – 1 BNC output (sequencing only)

4 Relay Outputs – 8 normally open dry contact outputs

5 SVGA Monitor Output – 15-pin output

6 Ethernet Adapter Port – 10/100 port

7 NTSC/PAL Selection Switches – 1 or 2, depending on model

8 Joystick Port (not used)

9 Microphone Jack (not used)

10 Audio In/Out (not used)

11 COM 2 Serial Port – 9-pin port

12 LPT1 Printer Port – 25-pin port

13 COM 1 Serial Port – 9-pin port

14 USB Ports – For Pelco-supported devices only

15 Keyboard (PS/2) Input

16 Mouse (PS/2) Input

17 AC Power Output

18 Power Voltage Selection Switch – This product is set at the factory to operate on 115 VAC. For 230 VAC operation, move

the switch to the 230 VAC position before applying power to the unit.

19 AC Power Input – Please see

Important Safeguards and Warnings.

CAM1 CAM2 CAM3 CAM4 CAM5 CAM6

CAM7 CAM8 CAM9 CAM10 CAM11 CAM12

CAM13 CAM14 CAM15

SENSOR

12 34 56 78 COM

CAM16 VIDEO

RELAY OUTPUT

12 34 56 78 COM

L-OUT L-IN

MIC

Audio

NTSC

PAL

ACT LINK

NTSC

PAL

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Pelco DX7100 User Manual Page 6