Pelco DF8 User Manual

C2433M-D (9/06)INSTALLATIONDF8 SeriesPendant Dome

10 C2433M-D (9/06)MaintenanceClean the acrylic dome as needed. Be careful not to scratch the surfaces of the dome.Exterior surface: Clean the dome’s e

C2433M-D (9/06) 11SpecificationsELECTRICALInput Voltage 14-30 VAC (outdoor models only)Input Power 53 VA at 24 VAC (for heater and blower)GENERALConst

Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • www.pelco.comUSA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150Internat

2 C2433M-D (9/06)ContentsImportant Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C2433M-D (9/06) 3Important Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5.

4 C2433M-D (9/06)DescriptionDF8 Series pendant domes are discreet surveillance domes that are designed for indoor or outdoor use.Indoor pendant models

C2433M-D (9/06) 5Installation PARTS LISTThe DF8 shipping carton contains two boxes. Inspect each box to make sure all parts are present.BACK BOX1 Back

6 C2433M-D (9/06)SURFACE MOUNTNOTE: If installing outdoors, apply a sealant between the back box and the mounting surface.1. Unscrew the three Philli

C2433M-D (9/06) 7*Cable requirements:75 ohms impedanceAll-copper center conductorAll-copper braided shield with 95% braid coverageEXAMPLE: An enclosur

8 C2433M-D (9/06)CAMERA AND LENSTo install the camera and lens:1. Outdoor models only: Connect 24 VAC power input wires to the AC IN connectors on the

C2433M-D (9/06) 93. Attach the trim ring leash to the T-shaped sheet metal tab on the retaining ring of the lower dome. Tuck the end of the trim ring