Pelco Camclosure IP110 User Manual download pdf (Page 13)

C3432M-G (4/09) 13

4S ELECTRICAL BOX INSTALLATION

1. Attach an ICS110-AP adapter plate (not supplied) to a 4S electrical box. Use two 8-32 x 0.75-inch

Phillips flat head screws (supplied with both the IP110 and the adapter plate).

2. Remove the two 8-32 x 0.375-inch Phillips pan head screws and washers to separate the cover from

the back

box.

3. Pull the cable and wires into the cover.

4. Attach the cover to the adapter plate with four 8-32 x 0.375-inch Phillips pan head screws (supplied

with the ada

pter plate). Use stainless steel hardware when installing the system outdoors.

5. Install the camera module into the back box before instal

ling the back box into the cover. Rotate the

camera module to access the mounting holes inside the back box (refer to Camera Module on

page 19 for more information).

6. Connect the cable and wires (refer to Wiring Tables on page 16 for information).

Figure 6. 4S Ele

ctrical Box Installation

7. Reinstall the back box inside the cover. Use the two 8-32 x 0.375-inch Phillips pan head screws and

washers (removed

earlier) to secure the back box to the cover.

8-32 X 0.375-INCH

PHILLIPS PAN HEAD

SCREWS WITH WASHERS

(SUPPLIED)

COVER

BACK BOX

8-32 X 0.375-INCH

PHILLIPS PAN

HEAD SCREWS

(SUPPLIED WITH

ICS110-AP)

CEILING/

WALL

4S STANDARD

ELECTRICAL BOX

8-32 X 0.75-INCH

PHILLIPS FLAT

HEAD SCREWS

(SUPPLIED)

ADAPTER PLATE

(ICS110-AP)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

No comments

Pelco Camclosure IP110 User Manual Page 13