Pelco Camclosure IP110 User Manual download pdf (Page 31)

C3432M-G (4/09) 31

Install Dome and Trim Ring

Figure 22. Dome Liner Adjustment

1. To adjust the dome liner (refer to Figure 22):

a. Align the screw holes in the trim ring with those in the back box to identify the proper dome

liner positio

b. Loosen the three Phillips screws located in the trim ring.

c. Insert the blade of a standard screwdriver in one of the adjustment groo

ves. Rotate the dome

liner to position the viewing window over the camera lens.

d. Tighten the three Phillips screws to lock the dome liner in

place.

2. Align the screw holes in the trim ring with those in the back box.

3. Tighten the tamper-resistant screws through the trim ring

into the back box. Use the 1/8-inch hollow

screwdriver bit (supplied).

LOOSEN SCREWS

ADJUSTMENT

GROOVE

LINER

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

No comments

Pelco Camclosure IP110 User Manual Page 31