Pelco DVR DX3016-060 User Manual Page 44
- Page / 85
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Pelco Manual C681M-D (2/02) 43
3. Turn the JOG dial to move the cursor to CH.TITLE, and then turn the SHUTTLE ring
to the right. The option starts flashing.
NOTE:
If the PRE A-REC field in the A-Rec/M-Det Setting menu has been set to
SHORT, MEDIUM, or LONG, the option does not flash because it cannot be
changed.
4. Turn the JOG dial to select the option, and the turn the SHUTTLE ring to the right to
finish setting.
Turning the JOG dial switches the title options as follows:
NONE, TITLE, CH. NO
NONE: Camera numbers and titles are not displayed.
TITLE: Camera numbers and titles are displayed.
CH. NO: Only camera numbers are displayed.
5. Do one of the following:
•Turn the JOG dial to go to another item in this menu.
•Turn the SHUTTLE ring to the left to return to the Menu Setting menu to go to an-
other menu.
• Press the SET UP button to exit the programming mode.
ALARM DISPLAY
When the unit receives an alarm input signal, the monitor displays images from the camera
with the alarm. If, during alarm recording, the recorder receives another alarm input signal,
the monitor displays images from the latest alarm recording camera channel. (The display
is single-camera mode.) The monitor returns to its original display mode after alarm record-
ing is completed.
Skip steps 1 and 2 if they have already been done.
1. Press the SET UP button to display the Menu Setting menu.
2. Turn the JOG dial to move the cursor to MPX DISPLAY, and then turn the SHUTTLE
ring to the right. The MPX Display menu appears.
3. Turn the JOG dial to move the cursor to ALARM DISPLAY, and then turn the
SHUTTLE ring to the right. The option starts flashing.
NOTE:
If the PRE A-REC field in the A-Rec/M-Det Setting menu has been set to
SHORT, MEDIUM, or LONG, the option does not flash because it cannot be
changed.
4. Turn the JOG dial to select ON or OFF, and then turn the SHUTTLE ring to the right.
The option stops flashing.
5. Do one of the following:
•Turn the JOG dial to go to another item in this menu.
•Turn the SHUTTLE ring to the left to return to the Menu Setting menu to go to an-
other menu.
• Press the SET UP button to exit the programming mode.
- DX3000 Series 2
- Digital Recorder 2
- Installation/ 2
- Operation Manual 2
- C681M-D (2/02) 2
- CONTENTS 3
- Pelco Manual C681M-D (2/02) 3 4
- LIST OF ILLUSTRATIONS 5
- Pelco Manual C681M-D (2/02) 5 6
- OVERVIEW 7
- FRONT PANEL CONTROLS 8
- Setting) menu 9
- Pelco Manual C681M-D (2/02) 9 10
- REAR PANEL CONNECTORS 11
- Warnings 12
- INSTALLATION 13
- POWER ON/POWER OFF/ 14
- ALARM IN/REC/CLOCK ADJ 14
- Input terminal 14
- • Input Circuit 14
- Second Unit 15
- First Unit 15
- Te rminator 16
- Programming 17
- Adding a Hard Drive(s) 17
- REMOVING A HARD DRIVE(S) 18
- BOOT-UP DELAY 18
- PROGRAMMING 19
- MAIN MENU 20
- SUB MENU (1) 20
- SUB MENU (2) 20
- SUB MENU (3) 20
- SUB MEN U ( 1 ) SUB MENU (2) 21
- (NOT USED) 22
- IMAGE QUALITY 23
- MAXIMUM RECORDING FIELDS 23
- DEFINE GROUP SETTING 24
- ALARM RECORDING DURATION 25
- RECORD ALARM 25
- PRE-ALARM RECORDING 26
- Motion Detection 27
- OVERWRITE 28
- AUDIO RECORDING 29
- AUTO EJECT 29
- CALL OUT 31
- CAPACITY REMAINING 31
- DATA CLEAR (ERASE) SELECTION 32
- This menu item 33
- HARD DISK DRIVE (HDD) FULL 34
- IM-CHECK MODE 35
- INITIALIZE MENUS 36
- MODE OUT 36
- Detection During a Timer 37
- Recording 37
- MULTIPLEXER DISPLAY 39
- Nine-Camera (Split 9) Setting 39
- Four-Camera (Split 4) Setting 40
- Operation 43
- ALARM DISPLAY 44
- Power Failure 45
- Recording Time 46
- Define Group 47
- RS-232C COMMUNICATION 48
- SAVING MENU SETTINGS 49
- SAVING MENU DATA 49
- RESTORING MENU DATA 49
- TIME AND DATE DISPLAY 50
- DISPLAY MODE 50
- CHARACTER SIZE 51
- CLOCK LOCATION 52
- TIME AND DATE SETTING 52
- TIMER RECORDING 53
- Select Re 54
- 14:00 15:00 16:00 17:00 55
- Timer Recording 56
- DX3009 Recording Time Tables 57
- DX3016 Recording Time Tables 57
- OPERATION 58
- ZOOM BUTTONS 60
- REMOTE VIEWING 60
- RECORDING 60
- BASIC RECORDING 60
- Playback 61
- PAUSE PLAYBACK 63
- REVERSE PLAYBACK 63
- ADJUSTING PLAYBACK SPEED 63
- Regular Playback Mode 63
- Time and Date Display 64
- Index Search 65
- Skip Search 66
- Alarm List Search 67
- Jump to Starting Point 67
- Auto Eject 69
- 30F 15F 7.5F 5F 70
- Using the COPY Button 71
- Backing up Data 71
- INFORMATION 72
- ELAPSED TIME DISPLAY 72
- POWER FAILURE LIST 72
- DX3009 RECORDING TIME TABLES 74
- STANDARD 75
- SUPERIOR 75
- SUPERIOR 77
- STANDARD 77
- WARNINGS 80
- TROUBLESHOOTING 81
- SPECIFICATIONS 83
- REGULATORY NOTICES 85
Related products and manuals for Digital Video Recorders (DVR) Pelco DVR DX3016-060
(78 pages)© 2020, manymanuals.com. All rights reserved. | 0.093 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals