Pelco DVR DX3016-060 User Manual download pdf (Page 47)

46 Pelco Manual C681M-D (2/02)

SELECT RECORDING MODE

There are three recording modes: A, B, and C. For example, mode A might be used for

daytime recording, mode B for nighttime recording, and mode C for weekend recording.

The cameras that will record in each mode are selected in the next section,

Define Group

The settings made for image quality and maximum recording fields apply to all three

modes.

Skip steps 1 and 2 if they have already been done.

1. Press the SET UP button to display the Menu Setting menu.

2. Turn the JOG dial to move the cursor to NORMAL REC SETTING, and then turn the

SHUTTLE ring to the right. The Normal Rec Setting menu appears.

3. Turn the JOG dial to move the cursor to SELECT REC MODE, and then turn the

SHUTTLE ring to the right. The option starts flashing

NOTE:

When SHORT, MEDIUM, or LONG is selected in the PRE A-REC field in

the A-Rec/M-Det Setting menu, the SELECT REC MODE field is automatically

set to A-REC (Alarm Record) and cannot be changed.

4. Turn the JOG dial to select mode A, B, or C, and then turn the SHUTTLE ring to the

right. The option stops flashing.

5. Do one of the following:

•Turn the JOG dial to go to another item in this menu.

•Turn the SHUTTLE ring to the left to return to the Menu Setting menu to go to an-

other menu.

• Press the SET UP button to exit the programming mode.

DEFINE GROUP

In the Define Group Setting menu selection, you choose which cameras will record during

the mode (A, B, or C) that was picked in the Select Recording Mode field. A camera can be

used in more than one mode.

Skip steps 1 and 2 if they have already been done.

1. Press the SET UP button to display the Menu Setting menu.

2. Turn the JOG dial to move the cursor to NORMAL REC SETTING, and then turn the

SHUTTLE ring to the right. The Normal Rec Setting menu appears.

3. Turn the JOG dial to move the cursor to DEFINE GROUP SETTING, and then turn the

SHUTTLE ring to the right. The Define Group menu appears.

NOTE:

If the PRE A-REC field in the A-Rec/M-Det Setting menu has been set to

SHORT, MEDIUM, or LONG, the menu channot be accessed.

4. Turn the JOG dial to select the camera channel, and then turn the SHUTTLE ring to

the right. The option starts flashing.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 84 85

No comments

Pelco DVR DX3016-060 User Manual Page 47