Pelco DVR DX3016-060 User Manual Page 45
- Page / 85
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
44 Pelco Manual C681M-D (2/02)
CAMERA TITLE
Titles can be added for each camera. In single-camera display mode, up to 16 characters
can be displayed. In four-camera display mode, the first 8 characters are displayed. Titles
cannot be displayed in nine-camera or sixteen-camera display mode. In addition, displayed
titles do not get recorded.
Skip steps 1 and 2 if they have already been done.
1. Press the SET UP button to display the Menu Setting menu.
2. Turn the JOG dial to move the cursor to MPX DISPLAY, and then turn the SHUTTLE
ring to the right. The MPX Display menu appears.
3. Turn the JOG dial to move the cursor to CAMERA TITLE, and then turn the SHUTTLE
ring to the right.
4. Turn the JOG dial to the right to move the cursor next to camera number, and then
turn the SHUTTLE ring to the right. The first character position of the TITLE setting
flashes.
NOTE:
If the PRE A-REC field in the A-Rec/M-Det Setting menu has been set to
SHORT, MEDIUM, or LONG, the option does not flash because it cannot be
changed.
DX3016 Models Only – The Camera Tile menu has two screens. When the cursor
is on camera 8, turn the JOG dial to the right to scroll to the next screen.
5. Turn the JOG dial to display the desired character, and then turn the SHUTTLE ring to
the right to move to the next position.
Turning the SHUTTLE ring to the left erases the character.
6. Repeat step 5 to finish entering the word. To exit the TITLE row, move the flashing
cursor to the right end, and then turn the SHUTTLE ring to the right.
7. Repeat steps 4-6 to enter other titles.
8. Turn the SHUTTLE ring to the left once (twice for DX3016 models) to return to the
MPX Display menu or twice (three times for DX3016 models) to return to the Menu
Setting menu, or press the SET UP button to exit the programming mode.
You cannot exit the menu if any TITLE character is flashing. Refer to step 6 to exit.
POWER FAILURE
There is nothing to program in this screen. It lists power failures. Refer to
Power Failure
in
the
Operation
section.
RECORD
IMAGE QUALITY
Skip steps 1 and 2 if they have already been done.
1. Press the SET UP button to display the Menu Setting menu.
2. Turn the JOG dial to move the cursor to NORMAL REC SETTING, and then turn the
SHUTTLE ring to the right. The Normal Rec Setting menu appears.
3. Check that the cursor is next to IMAGE QUALITY, and then turn the SHUTTLE ring to
the right. The Image Quality option starts flashing.
NOTE:
If the PRE A-REC field in the A-Rec/M-Det Setting menu has been set to
SHORT, MEDIUM, or LONG, this field cannot be changed.
- DX3000 Series 2
- Digital Recorder 2
- Installation/ 2
- Operation Manual 2
- C681M-D (2/02) 2
- CONTENTS 3
- Pelco Manual C681M-D (2/02) 3 4
- LIST OF ILLUSTRATIONS 5
- Pelco Manual C681M-D (2/02) 5 6
- OVERVIEW 7
- FRONT PANEL CONTROLS 8
- Setting) menu 9
- Pelco Manual C681M-D (2/02) 9 10
- REAR PANEL CONNECTORS 11
- Warnings 12
- INSTALLATION 13
- POWER ON/POWER OFF/ 14
- ALARM IN/REC/CLOCK ADJ 14
- Input terminal 14
- • Input Circuit 14
- Second Unit 15
- First Unit 15
- Te rminator 16
- Programming 17
- Adding a Hard Drive(s) 17
- REMOVING A HARD DRIVE(S) 18
- BOOT-UP DELAY 18
- PROGRAMMING 19
- MAIN MENU 20
- SUB MENU (1) 20
- SUB MENU (2) 20
- SUB MENU (3) 20
- SUB MEN U ( 1 ) SUB MENU (2) 21
- (NOT USED) 22
- IMAGE QUALITY 23
- MAXIMUM RECORDING FIELDS 23
- DEFINE GROUP SETTING 24
- ALARM RECORDING DURATION 25
- RECORD ALARM 25
- PRE-ALARM RECORDING 26
- Motion Detection 27
- OVERWRITE 28
- AUDIO RECORDING 29
- AUTO EJECT 29
- CALL OUT 31
- CAPACITY REMAINING 31
- DATA CLEAR (ERASE) SELECTION 32
- This menu item 33
- HARD DISK DRIVE (HDD) FULL 34
- IM-CHECK MODE 35
- INITIALIZE MENUS 36
- MODE OUT 36
- Detection During a Timer 37
- Recording 37
- MULTIPLEXER DISPLAY 39
- Nine-Camera (Split 9) Setting 39
- Four-Camera (Split 4) Setting 40
- Operation 43
- ALARM DISPLAY 44
- Power Failure 45
- Recording Time 46
- Define Group 47
- RS-232C COMMUNICATION 48
- SAVING MENU SETTINGS 49
- SAVING MENU DATA 49
- RESTORING MENU DATA 49
- TIME AND DATE DISPLAY 50
- DISPLAY MODE 50
- CHARACTER SIZE 51
- CLOCK LOCATION 52
- TIME AND DATE SETTING 52
- TIMER RECORDING 53
- Select Re 54
- 14:00 15:00 16:00 17:00 55
- Timer Recording 56
- DX3009 Recording Time Tables 57
- DX3016 Recording Time Tables 57
- OPERATION 58
- ZOOM BUTTONS 60
- REMOTE VIEWING 60
- RECORDING 60
- BASIC RECORDING 60
- Playback 61
- PAUSE PLAYBACK 63
- REVERSE PLAYBACK 63
- ADJUSTING PLAYBACK SPEED 63
- Regular Playback Mode 63
- Time and Date Display 64
- Index Search 65
- Skip Search 66
- Alarm List Search 67
- Jump to Starting Point 67
- Auto Eject 69
- 30F 15F 7.5F 5F 70
- Using the COPY Button 71
- Backing up Data 71
- INFORMATION 72
- ELAPSED TIME DISPLAY 72
- POWER FAILURE LIST 72
- DX3009 RECORDING TIME TABLES 74
- STANDARD 75
- SUPERIOR 75
- SUPERIOR 77
- STANDARD 77
- WARNINGS 80
- TROUBLESHOOTING 81
- SPECIFICATIONS 83
- REGULATORY NOTICES 85
Related products and manuals for Digital Video Recorders (DVR) Pelco DVR DX3016-060
(78 pages)© 2020, manymanuals.com. All rights reserved. | 0.572 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals