Pelco DX8100 User Manual download pdf (Page 11)

C2639M-B (8/09) 11

3. To remove a mounting basket:

NOTE: It is recommended that you do not remove previously installed drives. If you must remove a

drive for any reason, be sure to note the locations of the drives within the drive basket. It is critical that

you return the drives to their original locations in the DX8100.

a. Using a Phillips screwdriver, unscrew the four screws that secure the drive mounting basket

to the chassis. Refer to Figure 4.

Figure 4. Removing a System Disk Mounting Basket

b. Gently lift the basket up and out. Be careful not to force the basket free or to disturb other

components inside the unit. Refer to Figure 5.

Figure 5. Lifting System Disk Mounting Basket

4. Remove the system and data drive (if applicable) from the basket:

a. Using a Phillips screwdriver, unscrew the screws that secure the drive to the basket.

b. Lift the drive out of the basket.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

No comments

Pelco DX8100 User Manual Page 11