Pelco DX8100 User Manual download pdf (Page 7)

C2639M-B (8/09) 7

Installing a Hard Disk Drive

NOTES:

• The security surveillance service provided by the DX8100 is interrupted when the unit is taken

offline.

• A DX8100 can weigh between 39.8 lb (18.1 kg) to 46.4 lb (21.1 kg). It is recommended that two

people lift and remove the unit.

1. Properly shut down the DX8100 Series HVR/DVR. Refer to the manuals supplied with the unit.

DX8100.

2. Unplug the power cord from the wall socket.

3. Remove the power cord from the back of the DX8100.

4. Disconnect any cables or connections that may restrict access or interfere with the removal of the

unit.

5. If the DX8100 is mounted in a rack, remove it from the rack before installing an HDD. Two people

can lift and remove the HVR/DVR.

a. Unscrew the fasteners that secure the unit in the rack and carefully lift it out of the rack.

b. Move the DX8100 to an area that will provide full access to its internal components.

WARNING: It is critical that the unit be unplugged for your safety. You must remove the power

cord because current continues to flow through the DX8100 even when the unit is turned off. First,

unplug the power cord from the wall socket and then unplug it from the rear of the HVR/DVR.

WARNING: The chassis assembly includes parts with sharp edges. To avoid injury, use caution

when working in and around the chassis and components.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

No comments

Pelco DX8100 User Manual Page 7