Pelco DVR5300 User Manual download pdf (Page 16)

16 C1629M-F (3/08)

Figure 9. Fastening Mounting Brackets to Chassis

2. Attach one front-mount rail to one rear-mount rail. Make sure the rails are mounted back to back, as shown in Figure 10. Depending on rack

depth, use either three or four 8-32 x 0.375-inch Phillips truss head screws for each rail set. Leave the screws loose until step 9.

Figure 10. Assembling a Support Rail

3. Repeat step 2 for the other rail set.

4. If you are installing the unit into a square-hole rack: Insert 14 cage nuts into the square-hole rack as shown in Figure 11. Align the bottom

cage nuts on the front racks with the bottom cage nuts on the rear racks. Then align the top cage nuts on the rear racks with lowest of the

top cage nuts on the front racks.

ATTACHATTACH BRACKETS

(6) SCREWS

10.32 X 0.25-INCH

PHILLIPS PAN HEAD

(4) SCREWS

8-32 X 0.375-INCH

PHILLIPS TRUSS HEAD

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

No comments

Pelco DVR5300 User Manual Page 16