Pelco DVR5300 User Manual download pdf (Page 18)

18 C1629M-F (3/08)

Figure 12. Attaching Support Rails

6. Repeat step 5 for the second support rail assembly.

7. Attach one rack rail spacer to the front of the equipment rack (refer to Figure 13):

a. Position the bottom hole of the spacer above the ear of the front-mount rail.

b. Insert two 10-32 x 0.5-inch Phillips flat head screws into the spacer, one in the top hole and one in the bottom hole. Leave the middle

hole empty; the top thumbscrew on the DVR5300 will use it.

c. Tighten the two screws to secure the spacer to the rack.

REAR- RAILMOUNT

FRONT- RAILMOUNT

(4) SCREWS

10-32 X 0.5-INCH

PHILLIPS FLAT HEAD

(4) SCREWS

10-32 X 0.75-INCH

PHILLIPS PAN HEAD

RACK FRONT RACK REAR

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

No comments

Pelco DVR5300 User Manual Page 18