Pelco C2423M User Manual download pdf (Page 13)

AUTO IRIS

Main Menu

<Aux>

<Alarms, Zone Blank>

<Other>

EXIT

Auto-Iris Menu

Auto-iris mode Auto

Auto-iris level 7

Exit

Camera Menu

Backlight comp Off

Zoom limit x72

Reset camera

<Auto-iris>

<Next>

Exit

The following are the settings for auto iris:

Mode

Level

To change the settings for auto iris:

1. Program preset 95 (28). The main menu appears.

2. Position the cursor (>) beside Camera.

3. Press the Iris Open button to enter the Camera menu.

4. Position the cursor (>) beside Auto-Iris.

5. Press the Iris Open button. The Auto Iris menu appears.

6. Position the cursor (>) and select one of the following settings:

MODE - The cursor moves to one of two choices:

Auto - The iris is automatically adjusted to produce a constant video output as deter-

mined by the Level setting.

Off - Auto iris is disabled, and control is always manual.

Move the joystick up or down to toggle between Auto and Off. Press the Iris Open

button to select the choice, or press the Iris Close button if you do not want to change

the setting.

LEVEL - The cursor moves to a numeric value, which the dome uses to try to

maintain a certain light level. Changing the value of the Level setting will change the

video level to which the auto iris adjusts. This setting should be adjusted if the video

level in the auto iris mode is too bright or too dark. Move the joystick up or down to a

value. Press the Iris Open button to select the value, or press the Iris Close button if

you do not want to change the setting.

Pelco Manual C2423M (5/00) 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

No comments

Pelco C2423M User Manual Page 13