Pelco C2423M User Manual download pdf (Page 14)

AUTO IR LEVEL

Main Menu Camera Menu Next Menu IR Filter Menu

Slow shutter mode Auto

Shutter speed Auto

Auto focus mode Auto

Exit

<Aux>

<Alarms, Zone Blank>

<Other>

EXIT

Backlight comp Off

Zoom limit x72

Reset camera

<Auto-iris>

<Next>

Exit

IR Filter mode Auto

Auto IR Level Dusk

Exit

The IR level setting determines when the IR filter will switch IN or OUT. Following are the

available settings for the Auto IR Level:

Dusk = 1/60 second shutter speed

2 = 1/60 second shutter speed

3 = 1/30 second shutter speed

Dark = 1/15 second shutter speed

Slow shutter operation affects the auto IR level setting.

If slow shutter is set for manual operation, only two settings for the IR level are available:

Dusk and 2.

If slow shutter is set for automatic operation, all four IR level settings are available.

If the IR level is set at 3 or Dark and the slow shutter is turned off, the IR level will auto-

matically reset to 2.

To program the slow shutter mode, refer to the

Slow Shutter Mode

section.

To change the auto lR level settings:

1. Program preset 95 (28). The main menu appears.

2. Position the cursor (>) beside Camera.

3. Press the Iris Open button to enter the Camera menu.

4. Position the cursor (>) beside Next.

5. Press the Iris Open button to enter the Next menu.

6. Position the cursor (>) beside IR Filter.

7. Press the Iris Open button to enter the IR Filter menu.

8. Position the cursor (>) beside Auto IR level.

9. Press the Iris Open button. The cursor moves to the right.

10. Move the joystick up or down to toggle between the four level settings.

11. SELECT - Press the Iris Open button on your keyboard to select your choice.

CANCEL - Press the Iris Close button if you do not want to change the setting.

AUX MODE

Aux Menu

Aux 1 mode Normal

Aux 2 mode Normal

Exit

Main Menu

<Aux>

<Alarms, Zone Blank>

<Other>

EXIT

There are three settings for AUX mode:

Normal - Controller operated.

Latching - Pressing the AUX key turns on the AUX and the next press of the AUX key

turns it off.

Alarm - Any alarm input activates the AUX.

Refer to your controller manual for operating instructions.

To change the AUX mode:

1. Program preset 95 (28). The main menu appears.

2. Position the cursor (>) beside AUX.

3. Press the Iris Open button to enter the AUX menu.

Pelco Manual C2423M (5/00) 14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comments to this Manuals

No comments

Pelco C2423M User Manual Page 14

Comments to this Manuals

Related products and manuals for Camera accessories Pelco C2423M