Pelco SD5 User Manual download pdf (Page 44)

44 Pelco Manual C1456M-D (10/98)

To select the power-up mode:

1. Program preset 95 (28 if in 32-preset mode; refer to Section 5.4,PRESET

FUNCTIONS) to access the main menu (refer to Section 5.11.1). The main

menu will appear.

2. If the cursor (>) is not beside Power Up Mode, move the joystick up or down to

position the cursor beside Power Up Mode.

3. Press the Iris Open button to enter the Power Up Mode submenu.

4. Move the joystick up or down to cycle through the selections. Stop on the item

you want to select.

5. SELECT – Press the Iris Open button on your keyboard to select your choice.

CANCEL - Press the Iris Close button if you do not want to change the setting.

5.11.13 AUX Mode

This feature defines the output relay as either Normal (under control of the head

end), Latching (pressing the AUX key turns on the AUX and the next press of the

AUX key turns it off), or Alarm (any alarm input activates the AUX).

To change the AUX mode:

1. Program preset 95 (28 if in 32-preset mode; refer to Section 5.4, PRESET

FUNCTIONS) to access the main menu (refer to Section 5.11.1, MAIN MENU

ACCESS). The main menu will appear.

2. If the cursor (>) is not beside AUX, move the joystick up or down to position the

cursor beside AUX.

3. Press the Iris Open button to enter the AUX submenu.

4. Move the joystick up or down to position the cursor next to either Aux 1 mode

or Aux 2 mode.

5. Press the Iris Open button. The cursor will move to the right beside the word

Normal, Latching, or Alarm.

6. Move the joystick up or down to toggle between Normal, Latching, or Alarm.

7. SELECT - Press the Iris Open button on your keyboard to select your choice.

CANCEL - Press the Iris Close button if you do not want to change the setting.

5.11.14 Alarm Resume

This mode lets the dome resume its previous activity (scan, pattern, or previous

position) after all alarms are cleared.

To change the alarm resume mode:

1. Program preset 95 (28 if in 32-preset mode; refer to Section 5.4, PRESET

FUNCTIONS) to access the main menu (refer to Section 5.11.1, MAIN MENU

ACCESS). The main menu will appear.

2. If the cursor (>) is not beside Alarms, Zone Blank, move the joystick up or

down to position the cursor beside Alarms, Zone Blank.

3. Press the Iris Open button to enter the Alarms, Zone Blank submenu.

4. Move the joystick up or down to position the cursor beside Alarm Resume.

5. Press the Iris Open button. The cursor will move to the right beside the word

On or Off.

6. Move the joystick up or down to toggle between On or Off.

7. SELECT - Press the Iris Open button on your keyboard to select your choice.

CANCEL - Press the Iris Close button if you do not want to change the setting.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 57 58

Comments to this Manuals

No comments

Pelco SD5 User Manual Page 44

Comments to this Manuals

Related products and manuals for Camera accessories Pelco SD5