Pelco SD5 User Manual download pdf (Page 49)

Pelco Manual C1456M-D (10/98) 49

5.11.22 Park Time Minutes

This feature causes the dome to park at preset 1 after a programmed number of

minutes of control inactivity. The time can be set from 1 minute to 720 minutes (12

hours), or it can be set to zero, which disables this feature.

To change the park time:

1. Program preset 95 (28 if in 32-preset mode; refer to Section 5.4, PRESET FUNC-

TIONS) to access the main menu (refer to Section 5.11.21.1, TURNING LIMIT

STOPS ON OR OFF). The main menu will appear.

2. If the cursor (>) is not beside Other, move the joystick up or down to position the

cursor beside Other.

3. Press the Iris Open button to enter the Other submenu.

4. Move the joystick up or down to position the cursor beside Park Time Minutes.

5. Press the Iris Open button. A star will appear beside Park Time Minutes and the

cursor will move to the right beside the current park time.

6. Move the joystick up or down to change the park time.

7. SELECT - Press the Iris Open button on your keyboard to select your choice.

CANCEL - Press the Iris Close button if you do not want to change the setting.

5.11.23 Scan Speed

The scan speed is adjustable from 1-40 degrees per second. This occurs in three

scan modes: auto, random, and frame scan.

To change the scan speed:

1. Program preset 95 (28 if in 32-preset mode; refer to Section 5.4, PRESET FUNC-

TIONS) to access the main menu (refer to Section 5.11.1, MAIN MENU AC-

CESS). The main menu will appear.

2. If the cursor (>) is not beside Other, move the joystick up or down to position the

cursor beside Other.

3. Press the Iris Open button to enter the submenu entitled Other.

4. Move the joystick up or down to position the cursor beside Scan Speed deg/s.

5. Press the Iris Open button. The cursor will move to the right beside the number

of degrees.

6. Move the joystick up or down to toggle through the number of degrees (1-40)

until you reach the number you want. (If set on a low number, the scan will

appear to barely move but is still functioning.)

7. SELECT - Press the Iris Open button on your keyboard to select your choice.

CANCEL - Press the Iris Close button if you do not want to change the setting.

NOTE:

Preset 1 must be pro-

grammed for the dome to park.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 57 58

No comments

Pelco SD5 User Manual Page 49