Pelco HS4514 User Manual download pdf (Page 12)

12 C1472M-E (1/07)

Troubleshooting

If you need to troubleshoot the circuit board or wiring, refer to Figure 1 and Figure 2.

After the enclosure is mounted, opening the enclosure is more convenient using the following procedure:

1. Remove the two tamper-resistant screws securing the front of the enclosure cover.

2. Loosen, but do not remove, the two tamper-resistant screws securing the rear of the enclosure cover.

3. Push the top of the enclosure back approximately 0.25 inch (0.63 cm) and flip the top open.

4. Reverse the procedure to close.

Maintenance

Regularly scheduled maintenance is not required. Clean the outer surface of the enclosure with a nonabrasive cleaning cloth and antistatic

cleaner. Clean the viewing window with a mild nonabrasive soap and water to maintain picture clarity. Do not use kerosene or similar substances

that may damage the surface.

SERVICE MANUAL

If you need to repair the camera enclosure, obtain a service manual in one of the following ways:

• Go to Pelco’s web site at ftp://www.pelco.com and find service manual C1472SM.

• Contact Pelco’s Literature Department and request service manual C1472SM.

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

Pelco HS4514 User Manual Page 12