Pelco HS4514 User Manual download pdf (Page 13)

C1472M-E (1/07) 13

Specifications

MECHANICAL

Camera Mounting Removable camera sled that can be inverted to accommodate various cameras and lenses

Maximum Camera and Lens Size Accepts camera and lens combinations (including BNC connector) up to:

HS4514 6.70" H x 5.25" W x 14.0" L (17.02 x 13.34 x 35.56 cm)

HS4514-1/-2 6.25" H x 3.75" W x 12.0" L (15.88 x 9.53 x 30.48 cm)

Cable Entry Two openings 0.875-inch (2.22 cm), will accept PG-13.5 watertight fittings. Maximum cable diameter

0.47-inch (1.19 cm) or 1/2-inch (1.27 cm) conduit fittings (fittings not provided).

Lock Four 1/4-20 tamper-resistant screws (#10 1/4-inch drive socket for removing screws supplied; 1/4-inch

drive tool not provided)

ELECTRICAL

Power Input 24, 120, or 230 VAC; 50/60 Hz

Heater Power Consumption 120 VAC

24 VAC 230 VAC

HS4514-1/-2 60 watts 50 watts 55 watts

Heater is thermostatically controlled to activate ON at 42°-58°F (6°-14°C) and OFF at 72°-88°F (22°-31°C)

Electrical Connections One each of the following:

3-pin connector terminal block for power input

6-pin lens connector

9-pin connector terminal block for lens wiring

10-pin connector terminal block for camera/lens wiring

2-pin connector terminal block for spare connections

3-pin socket for camera power input

2-pin socket for optional camera power input

4-pin socket for heaters

GENERAL

Construction Body 0.134-inch thick steel

Viewing Window 1.25-inch (31.75 mm) thick, optically clear, LEXGARD

RS1250 laminate with MARGARD

surface

(UL 752, Level 6 rated)

Viewing Window Area 3.44" H x 4.75" W (8.74 x 12.07 cm)

Finish Gray polyester powder coat

Ratings Meets IP 55 and NEMA Type 3 standards

Environment Indoor/outdoor; -10° to 100°F (-23° to 38°C)

Dimensions 20.07" L x 6.32" W x 6.13" H (50.98 x 16.05 x 15.57 cm)

Weight 27 lb (12.25 kg)

(Design and product specifications subject to change without notice.)

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Pelco HS4514 User Manual Page 13