Pelco pelco is110 User Manual download pdf (Page 30)

30 C3426M-E (3/09)

Install Liner and Trim Ring

1. Adjust the liner (if installed), refer to Figure 16:

a. Align the screw holes in the trim ring with those in the back box to identify the proper liner

position.

b. Loosen the three Phillips screws located in the trim ring.

c. Insert the blade of a standard screwdriver in one of the adjustment grooves. Rotate the liner

to position the viewing window over the camera lens.

d. Tighten the three Phillips screws to lock the liner in place.

Figure 16. Adjusting the Liner

2. Align the screw holes in the trim ring with those in the back box.

3. Tighten the tamper-resistant screws through the trim ring into the back box. Use the

1/8-inch hollow screwdriver bit (supplied).

LOOSEN SCREWS

ADJUSTMENT

GROOVE

LINER

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Pelco pelco is110 User Manual Page 30