Pelco C3432M-F User Manual download pdf (Page 12)

12 C3432M-F (6/08)

404 PLASTER RING INSTALLATION

1. Remove the two 8-32 x 0.375-inch Phillips pan head screws and washers to separate the cover from

the back box.

2. Pull cable/wires into the cover. Use three supplied 6-32 x 0.75-inch Phillips pan head screws or two

supplied 8-32 x 0.75-inch Phillips pan head screws to attach the cover to an installed 404 plaster

ring. Use stainless steel hardware when installing the system outdoors.

3. Install the camera module into the back box before installing the back box into the cover. Rotate the

camera module to access the mounting holes inside the back box. Refer to Camera Module on

page 19 for more information.

4. Connect the cable/wires (refer to Wiring Tables on page 14 for information).

5. Reinstall the back box inside the cover. Use the two 8-32 x 0.375-inch Phillips pan head screws and

washers (removed earlier) to secure the back box to the cover.

Figure 7. 404 Plaster Ring Installation

6-32 X 0.75-INCH

OR 8-32 X 0.75-INCH

PHILLIPS PAN

HEAD SCREWS

(SUPPLIED)

8-32 X 0.375-INCH

PHILLIPS PAN HEAD

SCREWS WITH WASHERS

(SUPPLIED)

COVER

BACK BOX

CEILING/

WALL

404 PLASTER RING

(NOT SUPPLIED)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

No comments

Pelco C3432M-F User Manual Page 12