Pelco C3432M-F User Manual download pdf (Page 30)

30 C3432M-F (6/08)

Install Dome and Trim Ring

1. To adjust the dome liner refer to Figure 24 and complete the following steps:

a. Align the screw holes in the trim ring with those in the back box to identify the proper dome

liner position.

b. Loosen the three Phillips screws located in the trim ring.

c. Insert the blade of a standard screwdriver in one of the adjustment grooves. Rotate the dome

liner to position the viewing window over the camera lens.

d. Tighten the three Phillips screws to lock the dome liner in place.

Figure 24. Dome Liner Adjustment

2. Align the screw holes in the trim ring with those in the back box.

3. Tighten the tamper-resistant screws through the trim ring into the back box. Use the supplied

1/8-inch hollow screwdriver bit.

LOOSEN SCREWS

ADJUSTMENT

GROOVE

LINER

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

No comments

Pelco C3432M-F User Manual Page 30