Pelco C624M-C User Manual download pdf (Page 116)

116 C624M-C (5/06)

Linking Cameras to Record in Response to Motion Events

To link multiple cameras to record in response to motion detection events:

1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.

2. Click . The Linking page is displayed.

3. Click the Event-Recording Link Settings tab.

4. In the Motion Record Link Settings section, do the following:

a. Select a camera from the Motion Source Camera drop-down box.

b. Click the button of each camera you want to begin recording when motion is detected by the source camera.

5. Click Apply.

Figure 80. Event-Relay Link Settings: Video-Loss Link Settings Section

Linking Cameras to Record in Response to Alarm Events

To link multiple cameras to record in response to a single alarm input:

1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.

2. Click . The Linking page is displayed.

3. Click the Event-Recording Link Settings tab.

4. In the Alarm Record Link Settings section, do the following:

a. Select an Alarm channel from the Alarm Channel drop-down box.

b. Click the button of each camera you want to begin recording when the source alarm is triggered.

5. Click Apply.

Figure 81. Event-Recording Link Settings: Alarm Record Link Settings Section

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 227 228

No comments

Pelco C624M-C User Manual Page 116