Pelco C624M-C User Manual download pdf (Page 195)

C624M-C (5/06) 195

Modifying a Sequence Instance in the List

To modify a sequence instance in the list:

1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.

2. Click . (This icon appears only if the optional MUX display card is installed.) The External Output page is displayed.

3. In the Manual Camera Mapping Mode section, do the following:

a. Click the radio button (if it is not selected) to select the Manual Camera Mapping mode.

b. Select one of the sequence instances from the list by clicking on its name.

c. Select a screen division.

d. Drag cameras from the Site tree onto each view panel until all panels have been assigned a camera.

e. From the Min and Sec drop-down boxes, select the amount of time the sequence instance will remain on the monitor.

f. Click Modify.

g. Click Save.

The Save dialog box open.

4. Select an existing profile or enter a new profile name under which to save the sequence list.

5. Click OK.

6. Click Apply.

7. Click Apply in the External Monitor page.

Figure 137. Modify a Mapping Sequence



3f 3

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 227 228

No comments

Pelco C624M-C User Manual Page 195