Pelco C624M-C User Manual download pdf (Page 206)

206 C624M-C (5/06)

Sending E-Mail Notifications In Response to Video Loss Events

E-mail notifications can be sent whenever a camera attached to a DX8000 experiences a video loss event.

To cause e-mail notifications to be sent in response to video loss events:

1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.

2. Click . The Notification page is display.

3. Click the Emergency E-mail Notification Setup tab.

4. In the Notification Items section, do the following:

a. Click the Video Loss check box.

b. Click once in the Selected Channels field to the right of the words Video Loss. The Selected Channels dialog box opens.

c. Do one of the following:

• Click the check box of each channel you want to monitor for video loss detection events.

• Click Select All to monitor all channels for video loss detection.

• Click Deselect All to deselect all channels.

5. Click OK.

6. Click Apply.

SETTING UP E-MAIL NOTIFICATION GROUPS

The DX8000 allows you to set up groups, to send an emergency notification to multiple users. The DX8000 supports the following:

• You can create up to 32 e-mail notification groups.

• Up to 32 members can be assigned to each e-mail group.

• A group can be notified in response to an alarm or motion detection event.

This section describes how to set up e-mail notification groups and includes the following topics:

• Adding an E-Mail Notification Group on page 206

• Modifying an E-Mail Group Name on page 207

• Deleting an E-Mail Group on page 207

• Adding Members to an E-Mail Group on page 207

• Deleting Members from an E-Mail Group on page 208

• Modifying E-Mail Group Member Attributes on page 209

Adding an E-Mail Notification Group

To add an e-mail notification group:

1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.

2. Click . The Notification page is displayed.

3. Click the Emergency E-mail Notification Setup tab.

4. In the Mail Group area, do the following:

a. Click Manage Groups. The Group Management dialog box opens.

b. Click Add Group. The Manage Groups dialog box opens.

c. Enter the name of the group. (Group names can be up to 32 characters in length and can include spaces but not special characters.)

5. Click OK.

6. Click Close.

7. Click Apply.

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 227 228

No comments

Pelco C624M-C User Manual Page 206