Pelco C624M-C User Manual download pdf (Page 137)

C624M-C (5/06) 137

6. Using the Maximum Frame Rate Settings sliders, set the maximum frame rate for each resolution.

Setting the maximum frame rate for a resolution will impose a limit on how high frame rates can be set on individual channels using that

resolution. In certain cases, setting a lower maximum frame rate for a particular resolution may free up resources to be used by channels

set at another resolution. In any case, frame rates cannot be set for any channel or resolution beyond the availability calculated by the

DX8000.

7. To set a global frame rate for all channels of a particular resolution type, move the slider under Global Frame Rate Settings. Select a frame

rate from 1 to 30 ips according to the available capacity for that resolution.

8. To set the frame rate for individual channels, use the sliders in the top portion of the screen. Select a frame rate from 1 to 30 ips according

to the available capacity for that channel.

9. Click Default to set the Maximum Frame Rate Settings values back to their factory defaults.

10. Click OK.

11. Click Apply when you return to the Schedule Setup screen.

Figure 102. Advanced Frame Rate Configuration Screen







 



1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 227 228

No comments

Pelco C624M-C User Manual Page 137