Pelco C624M-C User Manual download pdf (Page 141)

C624M-C (5/06) 141

Configuring Advanced ATM/POS-Activated Relay Output

To configure an ATM/POS-activated relay output:

1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.

2. In the Setup dialog box, click . The Schedule page is displayed.

3. Click the Configure Relays button. The Configure Relays dialog box opens.

4. Click the ATM/POS tab if it is not already selected.

5. Configure each relay that is linked to an ATM/POS:

a. Click the drop-down box to select a relay.

b. Select a relay timing value from the Activation Period drop-down box.

Figure 106. Linking Relays to ATM/POS

The following table describes the available options.

Table AK. ATM/POS-Activated Relay Settings

Option Result

Disable Relay will not activate when the ATM/POS event occurs.

Follow Event Relay will activate at the exact same time the ATM/POS event occurs.

1, 3, 5, 10,15, and 20 Seconds Sets the amount of time the relay will remain active after the ATM/POS event occurs.



1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 227 228

No comments

Pelco C624M-C User Manual Page 141