Pelco ES31C User Manual download pdf (Page 35)

C307M-I (11/05) 35

Limit Stops Menu

The manual pan limit stops can be set at the controller using the Limit Stops menu:

1. Program preset 95 (28). The main menu appears.

2. Position the cursor (>) beside Limit Stop.

3. Press the Iris Open button to enter the Limit Stop menu.

4. Move the cursor to Set Man Limits and press the Iris Open button. PRESS IRIS OPEN TO SET LEFT LIMIT appears.

5. Move the pan and tilt to the desired left limit position and press the Iris Open button to set the left manual limit. PRESS IRIS OPEN TO SET

RIGHT LIMIT appears.

6. Move the pan and tilt to the desired right limit position and press the Iris Open button to set the right manual limit.

7. Exit the Limit Stop menu.

Clear Manual Stops

To clear the manual limit stops:

1. Program preset 95 (28). The main menu appears.

2. Position the cursor (>) beside Limit Stop.

3. Press the Iris Open button to enter the Limit Stop menu.

4. Move the cursor to Clear Man Limits and press the Iris Open button. The cursor will ﬂash to an asterisk (*) brieﬂy to indicate the limits have

been disabled.

Scan Limit Stops

When scan limit stops are set, the pan and tilt reverses direction during random, frame, or auto scanning when a limit stop is reached. The man-

ual scan limit stops can be set in one of two ways:

At the controller by programming presets 92 and 93

At the controller by programming the Limit Stops menu

Presets

Refer to the documentation for your control system for programming presets, and then do the following:

1. Make sure limit stops are turned ON, then exit the menu.

2. Push the joystick left until you reach the limit you want the camera to go to on the left.

3. Program preset 92 (25).

4. Push the joystick right to the limit you want the camera to go to on the right.

5. Program preset 93 (26).

Setting presets 92 (25) and 93 (26) to the same point disables manual limit stops.

NOTE: Programming preset 92 (25) disables the scan limit stops until preset 93 (26) is set. Preset 92 is the left scan limit and preset 93 is the

right scan limit.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 67 68

No comments

Pelco ES31C User Manual Page 35