Pelco ES31C User Manual download pdf (Page 9)

C307M-I (11/05) 9

4. Route the wires and cables through the center of the Esprit mount.

Reinstall the transformer module into the base. The transformer module

can be positioned in the mount base in only one orientation.

ES30C-5/ES31C-5 Models Only:

Set the 120/230 voltage selector switch on the transformer to the appropriate voltage.

6. Connect wires and cables.

a. Connect to power. Use the two supplied clamp connectors to connect the AC line and neutral.

b. Connect the video coaxial cable to the BNC connector.

c. Connect the wiring for a two-wire or four-wire control system. This step does not apply to Coaxitron

control systems.

d. Connect AUX 2 (optional). Refer to the schematic drawing for an example of how to wire AUX2.

120/230 VAC 24 VAC

Black wire Input (AC Line) White wire Input (AC Line)

White wire AC Neutral White wire AC Neutral

Green wire Ground Green wire Ground

Green wire RX

Red wire RX+

Black wire TX

White wire TX+

Orange wire AUX 2

Blue wire AUX 2 COMMON

120/230 VOLTAGE

SELECTOR SWITCH

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 67 68

No comments

Pelco ES31C User Manual Page 9