Pelco ES31C User Manual download pdf (Page 41)

C307M-I (11/05) 41

POWER-UP MODE

This feature lets the dome resume a desired condition following power-up. The menu includes the following choices.

Default: On power-up, the system goes through a conﬁguration cycle and stops at zero reference, showing “Conﬁguration Done,” address, and

mode settings on the screen.

Park: The system moves to preset 1 when the power-up sequence ﬁnishes. The only text on the screen is the preset label (if any is programmed).

Scan Auto: The system initiates scan mode when the power-up sequence ﬁnishes. Again, there is no text.

Scan Frame: The system initiates a frame scan when the power-up sequence ﬁnishes.

Scan Rand: The system initiates a random scan when the power-up sequence ﬁnishes.

Full Pat: The system initiates its programmed pattern when the power-up sequence ﬁnishes. The length can be set to 1.5, 3, or 6 minutes.

Half Pat 1: The system initiates the ﬁrst half-pattern when the power-up sequence ﬁnishes. The length can be set to .75, 1.5, or 3 minutes.

Half Pat 2: The system initiates the second half-pattern when the power-up sequence ﬁnishes. The length can be set to .75, 1.5, or 3 minutes.

The default setting is Default.

To select the power-up mode:

1. Program preset 95 (28). The main menu appears.

2. Position the cursor (>) beside Power Up.

3. Press the Iris Open button to enter the Power-Up menu.

4. Press the Iris Open button to move the cursor to the right.

5. Move the joystick up or down to cycle through the selections. Stop on the item you want to select.

6. Select: Press the Iris Open button on your keyboard to select your choice.

Cancel: Press the Iris Close button if you do not want to change the setting.

<Wiper>

<Other>

Exit

MAIN MENU

Power Up Default

Exit

Power-Up Menu

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 67 68

No comments

Pelco ES31C User Manual Page 41