Pelco IS150 User Manual download pdf (Page 27)

C3427M-D (2/09) 27

Service Connector

The IS150 Series Camclosure integrated camera system includes a service connector that outputs camera

video. Use it at the installation site to set up the field of view and to focus the camera.

Figure 16. Service Connector

Pelco offers two optional items that plug directly into the service connector. Before using either option,

you must loosen the tamper-resistant screws to remove the trim ring from the back box. Use the 1/8-inch

hollow screwdriver bit (supplied).

The optional CST150 has a 3-foot (0.9 m) cable and microdisplay for viewing camera video. Plug it into the

service connector and view the video.

NOTE: The three buttons on the CST150 are not used with the IS150 Series Camclosure.

The optional IS-SC is a 4-foot (1.2 m) cable with a service connector and a BNC connector. Plug the service

connector into the unit. Then connect the other end to any standard BNC (VIDEO IN) connector on a

monitor.

To assemble a longer service cable for the Camclosure integrated camera system, purchase the following

items from a local electronics supply store:

Qty Description

1 2.5 mm monaural headphone plug

1 CPM 88 miniature coaxial connector

1 RG174/U coaxial cable

SERVICE

CONNECTOR

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

No comments

Pelco IS150 User Manual Page 27